Search the site...
The Multi-Space Hard Top Plus provides one large, covered, spill containment storage area for as many drums as you have space for. Multi-Space Hard Top Plus's come in pre-set sizes from 8 to 20 drums, however extensions are available to create as large of a storage unit as you need.
So you’ve got a lot of drums that need outdoor spill containment? You could buy a bunch of our Ultra-Hard Top P4s. We’d be more than happy to sell them to you. But if you won’t have a need for multiple locations, and all of your drums will be stored in the same location, then the Multi-Space Hard Top Plus could be the perfect fit for you.
The Multi-Space Hard Top Plus provides one large, covered, spill containment storage area for as many drums as you have space for. Multi-Space Hard Top Plus’s come in pre-set sizes from 8 to 20 drums, however extensions are available to create as large of a storage unit as you need.
The Multi-Space Hard Top Plus is made from an all polyethylene construction for excellent chemical resistance, and won’t rust or corrode. The UV inhibitor in the polyethylene resin of the Multi-Space Hard Top Plus resists the degrading effects of sunlight, adding years to outdoor service life.
The Multi-Space Hard Top Plus uses low a profile (8 3/4″) containment pallet that positions drum-tops at a safe, convenient level to pour wastes into funnels or to use drum pumps. For ease of use, the roll-top covers of the Multi-Space Hard Top Plus can be easily lifted from waist height to access drum tops. Separate, lockable compartments in the Multi-Space Hard Top Plus feature a unique “2-way” entry system allows quick access to all four (4) drums. Swing-out doors provide safety and convenience for loading / unloading drums.
Each module of the Multi-Space Hard Top Plus works as its own separate container, offering flexible usage for a broad range of operations including storage of virgin chemicals, active hazardous waste collection, and storage of spill response supplies. The internal walls and separate sumps allow materials to be segregated safely in the Multi-Space Hard Top Plus. Rugged, 9000 lb. uniformly distributed load (UDL) capacity allows safe storage of IBC tanks as well as drums.
Water/Weatherproof | In standard weather conditions, your drums and/or containers should be protected and water gathering in the pallets is not a concern. However, during very gusty conditions or very heavy rainfall, some water may get into the unit. It is good practice to inspect the interior of the Hard Top after any severe weather. |
---|---|
Fire safety | Unit can melt in the event of a fire. It is not intended to be used in place of a safety cabinet. |
Ramp Storage | Ramp can fit with 2 drums inside closed unit. |
Containment Capacity | 75 gallons per section. Note: Sumps are not connected, and has an independant capacity. |
Load Capacity UDL per Compartment | 9,000 lbs |
Inner Dimensions | 62" High x 52" Wide x 52" Long per section. Kit includes a spill pallet, a black connecting wall, as well as two sets of roll-top doors and swing out doors. |
Drum Access | Access from both sides of unit. |
Assembly | Units ship partially unassembled for freight savings. |
Extensions | Extender kits are available to expand capacity beyond 20-drums. |
Warranty | Protected by the industry’s strongest warranty - Five (5) years against any material or workmanship defects. |
Compliance | Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175. Helps meet Stormwater Management Regulations - NPDES, 40 CFR 122.26 (1999). |
The founders of UltraTech International pioneered the field of spill containment products in the early 1980’s. UltraTech was formed in 1993 with one goal in mind: to create the world’s finest offering of spill containment and spill response products. Since then, its vision has expanded into additional product categories and the company now features a product line that consists of over 400 unique products.
Focusing intensely on meeting customer needs in an innovative and cost-effective manner, the company has introduced an average of 20 new products per year. UltraTech's design and development team is credited with nearly 50 patents. Its lines of “problem solver” products are market leaders in the following categories:
UltraTech’s manufacturing facility is located in northeast Ohio, an excellent location to ship throughout North America. The 100,000+ square foot factory is ISO 9002 certified and features state-of-the-art rotational molding machines and assembly operations.
UltraTech products are available throughout North America, Europe, Australia, New Zealand, Southeast Asia, Central and South America, and the Caribbean through an extensive network of safety, industrial and environmental products distributors. Field support is provided by knowledgeable and experienced manufacturer representatives and company personnel.
View Products