Based on the MAXIVIBE design, the MAXIPLY manual shaker dust collector is more economical since it does not need an enclosed cabinet and the cleaning system is performed by manually shaking the filter envelope. The (95 to 99% @ 5-10 microns) efficiency filter pocket envelope of the Maxiply allows clean air to be recycled back into the premises for maximum energy savings. Maxiply Manual Shaker Dust Collector was primarily developed for interior installation in small shops and vocational schools, its use is perfect for medium to large size pollutants such as sawdust, grinding, buffing or sanding of different metals, powders and composites. Air volume capacity of a Maxiply unit can vary from 500 CFM to 5000 CFM. The satin interior coated Pocket filter of the Maxiply helps to minimize dust caking on filter surface. Maxiply’s angled hopper ensures constant sliding of pollutants into the dust storage drum. The support structure of the Maxiply can be easily dismantled for relocation into another part of the facility using the unit or for a new installation in a room with limited size doorways.
The budget minded MAXIPLY manual dust collector is built to be installed inside and designed for small to medium size woodshops, arts and craft classes, composite shops, etc. Having the same high efficiency as the MAXIVIBE because it has the same filter, it needs limited footprint and can be relocated to another location since the filter frame can be dismantled and rebuilt in only a few hours. The manual cleaning action is performed by the shaker handle on the top of the Maxiply, allowing the dust to fall free from the glazed filter surface into the hopper and drum. The four open sides of the filter cabinet recycle clean air evenly, also saving money by not needing added expenses for a return air duct. MAXIPLY manual shaker dust collector air volume varies from 1700 CFM to 5000 CFM. Maximum as per NFPA 664 (Article 188.8.131.52.1).
The MAXIPLY dust collector single inlet design allows the main manifold to be connected to multiple drops toward pickup points. Since no return air ductwork or diffusers are required, filtered air is recycled into the facility by means of the four (4) opened sides of the pocket filter envelope. The direct drive fan and motor assembly carries the particulates into the angled hopper built into the Maxiply unit. Heavy dusts and solids fall into the drum by gravity and finer dusts are pushed into the high efficiency multiple pocket filter envelope.
The Integrity of the Maxiply manual shaker dust collector installation is ensured by bolting the support structure on the floor surface. When cleaning the Maxiply filter is required, the handle is moved rapidly back and forth making a rocking motion on the camshaft thus dislodging the particulates inside the filter. After a few minutes, the decanter effect allows the particulates to fall into the dust storage drum at the bottom of the Maxiply.