Search the site...
4 Drum Hard Top P4 Plus Spill Pallet
From: $4,193.68
From: $4,193.68
The 4 Drum Hard Top P4 Plus Spill Pallet provides a safe, convenient and effective place to store one, two, three or four 55-gallon drums. The roll-top doors above and swing out doors below on each side of the 4 Drum Hard Top P4 Plus Spill Pallet provide complete and easy access to the inside spill containment area.
Sump Capacity:
75 Gallons
Security:
Padlocks
Access Points:
2 Doors
Drain:
Optional
Material:
Polyethylene
Product Details
The 4 Drum Hard Top P4 Plus Spill Pallet provides a safe, convenient and effective place to store one, two, three or four 55-gallon drums. The roll-top doors above and swing out doors below on each side of the 4 Drum Hard Top P4 Plus Spill Pallet provide complete and easy access to the inside spill containment area.
Simply place your drums inside of the 4 Drum Hard Top P4 Plus Spill Pallet with your drum handling equipment or with our optional ramp. Close the doors and you are done. Your drums inside the 4 Drum Hard Top P4 Plus Spill Pallet are protected from the elements and unauthorized access (the unit can be locked) and your property is protected from spills or leaks.
4 Drum Hard Top P4 Plus Spill Pallets feature a unique “dual enclosure” that offers significant ergonomic and convenience benefits – drums are easily accessed from either side. The P2 Hard Top’s roll-top covers can be easily lifted from waist height to access drum tops, no need to reach near ground level. For added safety, the 4 Drum Hard Top P4 Plus Spill Pallet uses a low profile (8 3/4″) containment pallet that positions drum-tops at a safe, convenient level to pour wastes into funnels or to use drum pumps.
4 Drum Hard Top P4 Plus Spill Pallets are forkliftable, lockable, and feature an all-polyethylene construction will not rust or corrode. A UV inhibitor in polyethylene resin in the 4 Drum Hard Top P4 Plus Spill Pallet resists degrading effects of sunlight, adding years to outdoor service life.
Specifications
| Water/Weatherproof | In standard weather conditions, your drums and/or containers should be protected and water gathering in the pallets is not a concern. However, during very gusty conditions or very heavy rainfall, some water may get into the unit. It is good practice to inspect the interior of the Hard Top after any severe weather. |
|---|---|
| Fire safety | Unit can melt in the event of a fire. It is not intended to be used in place of a safety cabinet. |
| Ramp Storage | Ramp can fit with 2 drums inside closed unit. |
| Assembly | Unit ships fully assembled. |
| Drum Access | Dual sided drum access |
| Inside Dimensions | 62" High x 52" Wide x 52" Long |
| Forklift-able | Yes, from front and back of unit. |
| Uniform Distributed Load | 9,000 |
| Containment Capacity | 75 |
| Warranty | Protected by the industry’s strongest warranty - Five (5) years against any material or workmanship defects. |
| Regulations | 40 CFR 264.175; Spill Prevention, Control and Countermeasure Act (SPCC); 40 CFR 122.26 |
Product Brand
The founders of UltraTech International pioneered the field of spill containment products in the early 1980’s. UltraTech was formed in 1993 with one goal in mind: to create the world’s finest offering of spill containment and spill response products. Since then, its vision has expanded into additional product categories and the company now features a product line that consists of over 400 unique products.
Focusing intensely on meeting customer needs in an innovative and cost-effective manner, the company has introduced an average of 20 new products per year. UltraTech's design and development team is credited with nearly 50 patents. Its lines of “problem solver” products are market leaders in the following categories:
- Spill Containment
- Stormwater Management
- Facility Protection
- Construction Compliance
- Oil Spill
- Microbes
- Rad Waste Management
UltraTech’s manufacturing facility is located in northeast Ohio, an excellent location to ship throughout North America. The 100,000+ square foot factory is ISO 9002 certified and features state-of-the-art rotational molding machines and assembly operations.
UltraTech products are available throughout North America, Europe, Australia, New Zealand, Southeast Asia, Central and South America, and the Caribbean through an extensive network of safety, industrial and environmental products distributors. Field support is provided by knowledgeable and experienced manufacturer representatives and company personnel.
View Products
